9
b.
Ensure you are not currently recording. If the red record
indicator is flashing at the top left of the screen, push the
OK button to stop recording.
c.
Push the MENU button, taking you to the VIDEO menu.
d.
Using the DOWN button highlight the setting named Plate
Number and push OK.
e.
Use the UP and DOWN buttons to cycle through the
characters. The OK button to confirm and move between
fields.
f.
Once the final plate character has been entered press OK
one last time to save and return to the VIDEO menu.
g.
Using the down key highlight the setting named Car Plate
Stamp and push OK.
h.
Use the UP and DOWN buttons to highlight either OFF or
ON.
i.
To confirm selection push the OK button, the KPT-722 will
take you back to the VIDEO menu.
10. Set Loop Recording
Your KPT-722 has the ability to record in a Loop mode, which
means older blocks of video files will be overwritten once the
memory card becomes full. You can set the amount of video
block time the KPT-722 will record for before a new video file
is started.
To change the length of the videos that the KPT-722 records
follow the directions below.
a.
Use the MODE button to make sure you are in VIDEO
mode (Video camera icon will be displayed in the top left
corner of the screen).
b.
Ensure you are not currently recording. If the red circle
record indicator is flashing at the top left of the screen,
push the OK button to stop recording.