11
12. Set Park Mode
Park Mode will monitor for activity using the G-Sensor while
the car is parked, even if your ignition is turned off. If activity is
detected, the KPT-722 will record 60 seconds of footage.
To set park mode on your KPT-722 follow the directions below:
a.
Use the MODE button to make sure you are in VIDEO
mode (Video camera icon will be displayed in the top left
corner of the screen).
b.
Ensure you are not currently recording. If the red record
indicator is flashing at the top left of the screen, push the
OK button to stop recording.
c.
Push the Menu button, taking you to the VIDEO menu.
d.
Using the DOWN button highlight the setting named
Parking Monitor and push OK.
e.
Use the UP and DOWN buttons to highlight either OFF or
ON.
f.
To confirm selection push the OK button, the KPT-722
will take you back to the VIDEO menu.
13. Set Motion Detection
Motion Detection monitors on screen movement and will start
recording when movement is detected. Motion Detection will
also stop recording after 10 seconds of no on screen movement.
a.
Use the MODE button to make sure you are in VIDEO
mode (Video camera icon will be displayed in the top left
corner of the screen).
b.
Ensure you are not currently recording. If the red circle
record indicator is flashing at the top left of the KPT-722’s
screen, push the OK button to stop recording.
c.
Push the MENU button taking you to the VIDEO menu.