KAPSCH FreeStar, User Manual, Page: 55 / 78

Registering the FreeStar to a DECT Base Set
44 73046 0001 BA / Ausgabe 00 / 2000.07.28
9
Registering to a Kapsch ClipStar
•
Set the base set in registration mode by pressing and holding the paging
key for 20 seconds. Now you hear a beep tone and you can follow the
standard registration instructions.
•
The Kapsch ClipStar default PIN code is ‘ 1590 ’.
Registering to a Detewe Eurix 240
•
Set the base set in registration mode by interrupting the power supply for
20 seconds. From now on, you can follow the standard registration
procedure.
•
The default PIN code of the Eurix 240 are the last 4 digits of the serial
number.
Note: The Detewe Eurix 240 does not support the unanswered call list for
missed calls.
Registering to a Tiptel Dectline C
•
Set the base set in registration mode by pressing the paging key for 10
seconds. Now the base set LED starts flashing and you have 1 minute to
follow the standard registration procedure.
•
The Tiptel Dectline C default pin code is ‘ 0000 ’.
Note: No number display function on incoming calls on the FreeStar when
registered to Tiptel Dectline C and no unanswered call list function.