KAPSCH FreeStar, User Manual, Page: 54 / 78

FreeStar User's guide
8
2000.07.28 / Ausgabe 00 / 44 73046 0001 BA
Standard Registration Procedure
•
Set the base set in registration mode (see your DECT base set manual).
This is usually done by pressing and holding the paging key on the base
set until you hear an acoustic signal.
•
Press the key 1 time.
•
Press OK .
•
Choose a base set and
press
OK .
•
Enter the PIN code of your base set
(refer to your DECT base set manual).
This code is usually:
0000 .
•
Press OK . The FreeStar immediately starts
searching for your DECT base set. As soon as
it is found, the display reads the base set
identification code.
•
Press OK to confirm or press
ESC to cancel your registration.
•
If the phone cannot find the base set, it returns
to the initial display. Repeat the registration
procedure.
•
If the FreeStar is registered to a base set, the
‘aerial’ symbol appears in the upper right
corner of the display. The internal number of
your FreeStar then appears in the lower right
corner (depends on your DECT base set).
Note: The FreeStar phone can be registered
to 4 different base sets. The base sets to
which the FreeStar is registered, are
indicated with a
! symbol.
Menu
Monitor mode
Setup
Registration
Registration
Base 1
Base 2
Base 3
Pin code?
Base search 1
FreeStar 2
Registration
Base 1 !
Base 2
Base 3