kaps3 City Driver, Instruction

Page: 21 / 28

2.) Remove any accessory items from the soft carrier bag.
3.) Use the snap fasteners to attach the hood to the carrier bag.
4.) Now, put the soft carrier bag into the pushchair.
5.) After that, attach the soft carrier bag using the snap hooks provided for this
purpose -see Figure 9.
To position the crossbar
1.) The crossbar can be adjusted in the direction of travel or opposite to the
direction of travel.
2.) A lever is provided on either side; pull these levers towards you at the same
time – see Figure 10.
3.) The crossbar will now change its position.
4.) pram FLASH:
Please unlock (push up) the red handle bar safety lock on both sides before
turning the handle bar
– see figure # 11
The diaper bag can be fastened to the crossbar by means of the two snap
fasteners.
To adjust the height of the push bar:
1.) Pres together both snap fasteners provided on either side of the crossbar at
the same time – see Figure # 12.
2.) The position of the push bar can now be adjusted as desired.
To attach the foot muff
1.) Fold the crossbar backwards - see Figure #10.
2.) Now, pull the foot muff over the lying surface.
3.) Use the snap fasteners to attach the foot muff to the hood.
4.) Please note that the crossbar must be folded backwards to attach the foot
muff.
To attach the surface cover for the Flash
Please attach the cover for the pram mode using the zip around the cover and
the zip on the prams material.
20 21