Kapro Prolaser 852, User Manual

Page: 10 / 84

10
Working in Automatic mode (self-leveling):
In automatic mode the laser level will level itself in the range
of ± 3° and will project a horizontal line, vertical line or both
lines simultaneously.
1. Remove the laser from its case and place it on a solid, flat,
vibration free surface or on a tripod.
2. Slide the locking switch #1 to the ON position. The laser
level will generate the crossed horizontal and vertical lines.
3. Choose the beams that you want to work with by pressing
the
H/V
button.
4. If the initial slope of the laser is beyond ± 3° and the
automatic mode is activated, the laser lines will
flash
.
In this case, reposition the laser on a leveled surface.
5. Before moving the laser level, switch the laser to
OFF
.
This will lock the pendulum and protect your laser.
OPERATING INSTRUCTIONS