13
GB
NOISE AND VIBRATIONS
Measured values determined according to EN60745
lpa: 94dB (A)
wpa: 105dB (A)
k:3dB (A)
WEAR EAR PROTECTIONS!
VIBRATIONS
Measured values determined according to EN60745
ah:3,06m/s2
k:1,5m/s2
GENERAL SAFETY INSTRUCTIONS
1) keep the work area clean; unclean work areas increase the risk of accidents
2) use caution around the work area: do not expose the machine to rain do not use the machine in humid places or where there is
water keep work areas well lit do not use the machine in the presence of flammable liquids or gases
3) be watchful for the risk of electrical shock avoid bodily contact with surfaces that might act as earthing elements (pipes, radiators,
other metallic parts)
4) keep others far away from the machine do not allow other persons, particularly children, to touch the machine or power cable
even unintentionally
5) store safely when the machine is not being used it should be kept in a dry place out of children’s reach
6) do not force the machine the machine will work better if it does not work under stress
7) use the appropriate machine for the type of work to be done do not force small machines to do the work of more powerful machines
do not use machines to do jobs that are different from the ones they were designed to do
8) wear suitable work clothes do not wear loose clothes or jewelery that could become entangled in moving parts insulated safety
shoes are recommended wear a cap or hat to keep long hair out of the way always wear proper protective equipment wear safety
glasses while working, respiratory protective equipment that is certified according to standard EN149 must obligatorily be wornB
9) keep the power cable in good condition. do not pull the power cable to disconnect it from the socket keep the cable away from
oils, heat sources or sharp surfaces
10) maintain a proper safety position while working work in a balanced position, standing on both feet
11) store the machine carefully keep cutting surfaces sharp follow instructions for lubricating and spare parts inspect the power
cable periodically and if damaged have it repaired by an authorised service centre keep the machine and particularly the handles
clean and free of oil or grease
12) unplug the machine always unplug the machine from the mains power supply when it is not in use and when spare parts or
diamond discs are assembled or replaced
13) remove wrenches and other tools from the machine before starting up the machine, always check that wrenches or other tools
used for adjustments have not been left on it
14) avoid starting up the machine unintentionally ensure that the power switch is in the OFF position before plugging in the power
cable
15) use extensions for outdoor use if the machine is used outdoors, use only electric extensions suitable for outdoor use
16) be very attentive always be aware of what you are doing while the machine is functioning; do not use the machine when under
the effects of drugs or alcohol or when you are tired
17) check damaged parts before using the machine each time, check the components to make sure the machine is intact check
the alignment of moving parts, check for loose bolts or screws or other parts that may jeopardize the correct use of the machine
replace damaged protective devices immediately at an authorized service centre; do not use the machine without protective devices
if the switch is damaged, replace it immediately at an authorized service centre; do not use the machine if the switch is not in good
condition do not use the machine if the switch does not function correctly; contact an authorized service centre
