Page 5 of 10
Preparation of the Glazing Panels
The Panel Fixing Packs provided
contain self-tapping screws to
secure the panels. Plastic screw
caps are provided for use where
screw heads are visible.
Lay out all panels on floor to
ensure size of canopy is correct.
Pre-drill the clearance holes while
at ground level along the length of
each part (see drawing). Typically
this is 100mm in each end and 500
centres.
** ALWAYS ALLOW A
SUFFICIENT GAP FOR
EXPANSION.
tel: 01543 543 046 email: [email protected] web: carports-canopies.com
