Page 10 of 10
With the correct length guttering assembled, clip on and evenly space the remaining support brackets
along the complete length.
With end (2) supported in the fixed bracket, end (1) is to be 10mm to 20mm lower than end (2). This
will ensure flow towards the “Down Spout” Note: - to large a difference will on heavy rain fall cause
the water to flow over the end instead of going down the spout.
With the gutter in position, mark all brackets and fixing holes. This will ensure that when the brackets
are fixed in position with screws that the guttering will remain straight and undistorted, as the brackets
must be at the right height.
tel: 01543 543 046 email: [email protected] web: carports-canopies.com
