USER MANUAL
Model:
LMDT-810
Self programming motion detector transmitter for outdoor use. IP44
FEATURES:
* 67 million code combinations, no interference from neighbours.
* Easy operation, no wiring, battery operated.
* Outdoor use, compatible with KAPPA self programming type receivers connected
to lamp or doorbell as home safety system. (Not suitable for dimmer receiver)
* Delay-off time switch design. After delay, LMDT-810 sends a signal to
switch off the receiver.
* Battery low indication.
INSTALLATION:
A. INSTALLATION STEPS:
Select required location; position 3-4 metres above ground away from trees, direct
sources of heat and direct sunlight.Remove LMDT-810 from base. Using base as a
template, mark and drill 4 suitable holes.Secure base to wall using screws.Re-attach
LMDT-810.Adjust angle and direction.
Battery replacement illustrations:
B. DETECTION ANGLE AND RANGE
a. LMDT-810 detection angle is 110 degrees. To reduce the angle of detection,
keep the attached lens cover on LMDT-810. If necessary, cut off lens cover,
determine the detection angle size from min. 20 degrees to max. 110 degrees.
