USER MANUAL
MODEL:
ECMR-250
Dimmer module receiver
FEATURE:
Self program, 67 million codes.
ON/OFF/DIMMER function.
Suitable only for lights, 230V incandescent or halogen
lamp.
Connect with (non-dimmable) electronic transformer for 12V halogen lamp.
Not suitable for traditional transformer.
6 memories for scene setting.
Green LED indication.
Compatible to all KAPPA transmitters.
Standby power consumption: 1 W.
INSTALLATION:
(Fig. 1)
- Disconnect main power line.
- Connect LIVE AC 230V wire to ECMR-250 port L
↓
- Connect LIVE lamp wire to ECMR-
250 port
- Connect Neutral AC 230V wire to lamp.
- Turn on main power line.
- LED indicator light on and load light on.
HOW TO SET / DELETE CODE WITH KAPPA
TRANSMITTER:
SET (LEARN) CODE:
(Fig. 2)
- After correct installation, switch on the main power.
- Bring the transmitter near the receiver, push the self
program button on receiver once.
- Receiver LED will blink slowly, press transmitter
selected “ON” button.
- Receiver connected lamp will blink twice, code is
confirmed and LED stops blinking.
(Remember the transmitter button you selected for
the programmed receiver.)
- Transmitter and receiver code is auto programmed.
- Same procedure to link with KAPPA code switch
transmitter.
