Operation
Soft start ON/OFF Function:
Press the ‘ON’ button on remote control, the lights will gradually illuminate.
Press the ‘OFF’ button on remote control, the light will gradually turn OFF.
Dimming Function:
1. Make sure the load (light) is switched ON.
2. On the remote control press the ON button again, the loads will start to dim.
3. To stop at the desired brightness level, press the ON button again.
Dimming level dims in cycle, during the cycle if no signal is given
『
with 4 cycles it will stop at 100% brightness
』
.
！
After setting a dim level using the remote control the light is then switched OFF, the next time that the light is switched
back on again the dim level will automatically return to the previously stipulated setting.
Note:
This product is capable and safe for dimmable energy saving lamp and dimmable LEDs to operate up to 50W Max., but in
order to fulfil the regulation the product specification rating must indicate 24W Max.
Caution:
Please leave minimum of 1.5 meters in-between 2 or more receivers.
Specification:
RF frequency: 433.92 MHz
Input rating: 220-240V~50Hz
Output rating:
Incandescent and halogen lamps (230V~): 20W-200W Max.
Electronic transformers (12V~): 20W-200W Max.
Inductive transformers (12V~): 40W-200W Max.
Dimmable energy saving lamp: 3W-24W Max.
Dimmable LEDs: 3W-24W Max.
Standby power consumption: Below 1W.
