Scanning the server for viruses
51
4. In the list of tasks created for the server select the one you wish to
set up. Click on the
Edit
button located in the group of buttons on
the right.
5. This will open the
Edit
window (see Figure 23), with five tabs:
Options, Actions, Event log, NW-Notification
and
Notification
. These tabs are exactly the same as those in the task
setup window
On-Demand Scan
(<Server name>):<Task name>
/
Real-Time Protection
(<Server name>):<Task name>
. Make all
the desired changes and click on
Apply
or
OK
to save the settings.
6. Now it is necessary to schedule the task start. In the window
Kaspersky Anti-Virus on <Server name>
select the
Schedule
tab.
7. Select the mode for reviewing the Real-Time Protection and On-
demand Scan tasks –
On-demand scan and real-time protection
task schedule
.
8. Click on the
Add
button at the right side of the schedule.
9. In
the
Create new schedule for the task
(see Figure 24) dialog
box select the task you want to schedule and specify the
parameters of its start (see section A.4 on page 80). The task is
selected from the list in the left part of the window. The start
parameters setting procedure is exactly the same as the one
described above. After finishing, click
OK
.
