
Step 2 (Attach chain)
Run the chain through the hole on top of the arm and attach to the eye bolt. Insert eye bolt into
the middle hole of the arm base and seat. Slide on a washer and tighten a nut onto the bolt.
(Repeat steps 1 & 2 for opposite side)
4’, 5’ SWING CONT.
Step 3 (Attach arms and chains to back)
Pick up the back and set it across the bottom brace of the seat. Push on one side of the back to
fit it snugly between the brace. Insert a long bolt into the washer, arm and back. Slide on another
washer and tighten a nut onto the bolt.
(With the seat back snugly in place, repeat process for opposite side.)
2