
Step 2 (Attach back to chair)
Step 4 (Attach chair to base)
Step 3 Tighten all bolts in the chair
Align the holes midway up the back with the holes on the back of the arms. For both sides, insert
a medium bolt into the washer, arms and back then slide on another washer to each and tighten
nuts onto the bolts.
Align the holes on the bottom of the back with the holes that set the bolts in during step 1. You
may use a hammer to pound the bolts all the way through then for each bolt, slide on another
washer and tighten nut onto bolts.
*The front hangers on the base are 1” shorter than the back
With the front facing forward, slide the base under the chair.
Insert one of the short thicker bolts into the washer and front of chair. Lift the side of the chair
and push the bolt through the front hanger. Slide on another washer and tighten nut onto bolt.
(Repeat this process for the back hanger.)
Repeat the hanger bolting process for the opposite side then tighten all bolts.
GLIDER CONT.
2