SWDETLED MODIFICATION
33
SWDETLED Modification
KPC-1
Only
To perform the Software Carrier Detect LED (SWDETLED) enable modification, remove the circuit
board from the case as detailed in the Assembly and Disassembly section. Next, remove the 7910
(U-11) and bend pin25 out slightly so that it will not make contact with the socket when the IC is
re-inserted in U-11. Re-install the 7910 in socket U-11. With this modification completed, you will
not detect ANY packets unless CD is set to SOFTWARE.
Summary of Contents for KAM
