Supporting your digital lifestyle
™
Supporting your digital lifestyle
™
5
Step 2: Prepare “H” Assembly and Attach to TV
Step 2.1
Prepare the “H” Assembly.
Remove the four small M3 screws from the back of the
Vertical Support, as shown in Diagram C.
Slide the Horizontal Supports through the cutouts on the
Vertical Support, then insert and tighten the M3 screws,
as shown in Diagram C.
Step 2.2
Attach the “H” Assembly.
Generally, you will center the “H” Assembly on the
back of your TV, but you may offset the TV from center
by sliding the “H” Assembly left or right as desired.
Determine where you want to position the “H” Assembly
on the back of the TV, and re-attach the four washers and
Nylock nuts, as shown in Diagram D.
Next, you will create the “H” Assembly and attach it to the bracket arms mounted to your television.
Diagram C
Diagram D
1
1
2
2
3
3
M3 screws
M3 screws
Horizontal
Support
Vertical
Support
Vertical
Support
Nylock nut
Washer
