Introduction
Table of Contents
Table of Contents / Introduction . . . . . . . . . . . . . 2
Supplied Parts & Hardware . . . . . . . . . . . . . . . . . . 3
Setup - Step 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setup - Step 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setup - Step 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setup - Steps 4 to 7 . . . . . . . . . . . . . . . . . . . . . . . 7
Other Kanto Products . . . . . . . . . . . . . . . . . . . . . . 8
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2
Thank you for choosing a Kanto full motion wall mount. The PDX650 and PDX650W are designed to mount flat panel
televisions weighing up to 125 lbs (57 kg), extend almost 22” from your wall, sit less than 2” from the wall when fully
compressed, pan left and right up to 80º (depending on TV size), and tilt your TV +15º / –3º. You can also adjust the
horizontal level ±3°.
Read these instructions fully before installation of this mount. If you do not understand these directions, or have any
doubts about the safety of the installation, please consult a qualified installation contractor to install this mount. Make
sure there are no defective or missing parts. Do not use defective parts. If there is hardware missing, or if you are
uncertain whether the part is defective call Kanto directly at 1-888-848-2643 or [email protected]. Kanto cannot
be liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this
product.
This product should not be mounted on steel stud walls or cinder block walls. Consult a qualified installation contractor if
you are unsure about the type of wall you may have.
CAUTION
The maximum loading weight is 125 lbs (57 kg). This wall mount is intended for use only with the maximum
weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible
injury. Recommended TV Size: 37 inch to 70 inch.
See installation video online at:
www.kantoliving.com/product/mounts/pdx650#video
CAUTION
The wall you plan to affix the Kanto mount to must be able to support more than 5 times the weight of the
television and the wall mount combined. Do not use this product for any purpose other than to mount a flat panel TV on
a vertical surface as outlined in this manual. Improper installation may cause damage to your TV or serious injury. This
product should not be mounted to steel stud walls, cinder block or old concrete walls. Consult a qualified installation
contractor if you are unsure about the type of wall you may have.
