background image

4

WARNING 

Never over-tighten a bolt into the projector body.

Step 1: Attach Projector to Projector Adapter

Step 1.1

 Determine correct bolt size.

Determine the correct bolt size for your projector 
mounting holes. We provide a wide selection of bolts 
in varying lengths. See parts list 

A

 thru 

K

. Hand test the 

bolts to ensure you do not damage the projector. See 
Diagram A.

Step 1.2

 Select optional spacers.

Determine the correct size spacer (

Q

 thru 

T

) based on 

the surface you are mounting to. An uneven mounting 
surface can be leveled using the supplied spacers. See 
Diagram B.

Step 1.3

 Determine mounting arm configuration.

The projector adapter comes pre-assembled with (2) 
50mm and (2) 100mm mounting arms. If the projector’s 
mounting holes are out of reach of the projector adapter, 

use the extension arms (

Y

) provided (replacing one by 

one as required). The flexibility of the mount and the 
varying arm lengths will mean there is more than one 
solution for fitting the arms to your projector. It is best 
to use the shortest arm configuration possible while 
maintaining a suitable center of gravity for the projector. 
See Diagram C.

Once the appropriate arm configuration has been 
selected and assembled the projector adapter should be 
mounted on the projector (Diagram C). 

Step 1.4

 Test the projector Center of Gravity.

Lift the projector assembly by the center of the projector 
adapter to test the Center of Gravity, as shown in 
Diagram D. If necessary, loosen the extension arms 
slightly to adjust position of adapter, and tighten the 
bolts when the projector is balanced.

Diagram A

spacer 

(Q thru T)

if necessary

Diagram B

Diagram C

Diagram D

There are a wide variety of projectors available that use an assortment of bolt sizes. We provide a selection of 
mounting bolts to fit most projectors. 

Uneven 

Projector 

Surface

50 mm Arm

100 mm Arms

A-K

WARNING 

Never over-tighten a bolt into the projector body.

Summary of Contents for P301









Reviews: