background image

Introduction

Table of Contents

Table of Contents / Introduction  . . . . . . . . . . . . .  2

Supplied Parts & Hardware . . . . . . . . . . . . . . . . . . 3

Setup - Step 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Setup - Steps 2 to 4  . . . . . . . . . . . . . . . . . . . . . . . 5

Setup - Steps 5 to 7  . . . . . . . . . . . . . . . . . . . . . . . 6

Other Kanto Products . . . . . . . . . . . . . . . . . . . . . . 7

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2

Thank you for choosing a Kanto universal ceiling projector mount. The P101 and P101W are designed to mount TV 

projectors weighing up to 22 lbs (10 kg). This mount kit allows for installations 3” (7.5 cm) from the ceiling, or 9” to 12” 

(22.5 to 30cm) using the supplied extension tubes. The P101 and P101W provide a 360° swivel and a 20° tilt.

Read these instructions fully before installation of this mount. If you do not understand these directions, or have any 

doubts about the safety of the installation, please consult a qualified installation contractor to install this mount. Make 

sure there are no defective or missing parts. Do not use defective parts. If you are uncertain whether the part is defective 

contact Kanto directly at 1-888-848-2643 or [email protected]. Kanto can not be liable for property damage or 

injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this product. 

CAUTION  

The maximum loading weight is 22 lbs (10 kg). This projector mount is intended for use up to the maximum 

weight restrictions indicated. Use with products heavier than the maximum weights indicated may result in instability 
causing possible injury. 

CAUTION 

The ceiling you plan to affix the Kanto mount to must be able to support more than 4 times the weight of 

the projector and the ceiling mount combined. Do not use this product for any purpose other than to mount a 
projector on a surface up to 20° from horizontal as outlined in this manual. Improper installation may cause damage 
to your projector or serious injury. This product should not be mounted to drop ceilings, cinder block or old concrete 
ceilings. Consult a qualified installation contractor if you are unsure about the type of ceiling you may have.

Visit our website at kantoliving.com for the most recent version of this manual

See installation video online at: 

www.kantoliving.com

Summary of Contents for P101









Reviews: