background image

Introduction

Table of Contents

Table of Contents / Introduction  . . . . . . . . . . . . .  2

Supplied Parts & Hardware  . . . . . . . . . . . . . . . . .  3

Setup - Step 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

Setup - Step 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

Setup - Steps 3 to 4  . . . . . . . . . . . . . . . . . . . . . . . .  6

Setup - Steps 5 to 6  . . . . . . . . . . . . . . . . . . . . . . . .  7

Other Kanto Products  . . . . . . . . . . . . . . . . . . . . . .  8

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

2

Thank you for choosing a Kanto FMC4 full motion TV wall mount with adjustable pivot point. The FMC4 is designed 

to mount 

fl

 at panel televisions weighing up to 100 lbs (45 kg), extend up to 26” from your wall, move your pivot point 

from side to side up to 20”, pan left and right up to 135º (depending on TV size), and tilt your TV +10º / –5º.

Read these instructions fully before installation of this mount. If you do not understand these directions, or have 

any doubts about the safety of the installation, please consult a quali

fi

 ed installation contractor to install this mount. 

Make sure there are no defective or missing parts. Do not use defective parts. If you are uncertain whether the part is 

defective call Kanto Living directly at 1-888-848-2643 or [email protected].

This product should not be mounted on steel stud walls or cinder block walls. Kanto cannot be liable for property 

damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this product. 

CAUTION 

The maximum loading weight is 100 lbs (45 kg). This wall mount is intended for use only with the 

maximum weights indicated. Use with products heavier than the maximum weights indicated may result in 

instability causing possible injury. 

CAUTION 

The wall you plan to a

  x the Kanto mount to must be able to support more than 5 times the weight of the 

television and the wall mount combined. Do not use this product for any purpose other than to mount a 

fl

 at 

panel TV on a vertical surface as outlined in this manual. Improper installation may cause damage to your TV or 

serious injury. This product should not be mounted to steel stud walls, cinder block or old concrete walls. Consult 

a quali

fi

 ed installation contractor if you are unsure about the type of wall you may have.

Visit our website at kantoliving.com for the most recent version of this manual

See installation video online at: 

Regarder la video d’installation en ligne à:

Vea el vídeo de instalación online en:
www.kantomounts.com

Summary of Contents for FMC4









Reviews: