7
English
x2
Step 3: Attach Shelf Supports
Step 4: Attach Shelves
With the wall plate(s) secured to the wall, you can now attach
the shelf support(s) (
J
) at the desired height, using two M6
x 10mm bolts (
F
), as shown in Diagram G . Tighten using the
Allen Key (
I
) .
If necessary, you can move the location of the cable
management clips by unscrewing the M6 x 10 mm bolt
holding the clip to the wall plate, repositioning the cable
management clip, and screwing the M6 x 10mm bolts . Tighten
using the Allen Key (
I
) . The shelf system does not interfere
with the cable covers, so you can position the shelf supports
and cable management clips wherever you wish .
With the shelf support(s) attached at the desired height,
you can now attach the glass shelf (or shelves) (
K
) . Use two
M6 x 15mm bolts (
G
) and two plastic washers (
H
) for each
shelf, as shown in Diagram H .
Diagram G
Diagram H
Cable
Management
Clip
F
G
H
J
K
3.1
3.2