【
13
】
ADJUSTING THE PRESSER FOOT
13-1 Presser foot pressure
The presser foot pressure should be as light as
possible, yet be sufficient to feed the fabric and
produce uniform stitches.
To increase the presser foot pressure, turn the
adjusting knob clockwise.
13-2 Position of the presser foot
Fit the presser foot onto the presser bar so that the
needle can drop correctly to the center of the needle
drop hole on the presser foot.
Adjustment is made by loosening screw B.
13-3 Foot lift
Position stopper C with the presser foot
approximately 9mm above the top surface of the
needle plate and then tighten nut D.
< Note>
Before adjusting machine, be sure to turn off the
motor.
19
F
F
B
B
X
X
s
s
e
e
r
r
i
i
e
e
s
s
