1
Ｌ
Ｌ
Ｘ
Ｘ
-
-
Ｓ
Ｓ
Ｐ
Ｐ
s
s
e
e
r
r
i
i
e
e
s
s
【
1
】
SPECIFICATION
Machine model
LX5801
（
1 needle, double chain stitch
）
Machine motor
Servo Motor
Max. machine speed
600rpm
Standard needle type
UY128GAS
#14
Sequin size
5mm
（
Factory Setting
）
3mm
（
Including optional presser foot & guide
）
7mm
（
Including optional presser foot & guide
）
Sewing pattern
1 sequin on every stitches
1 sequin on 2 stitches
1 sequin on 10 stitches
（
max
）
Sequin reel size
A sequin reel of 180 mm in diameter
Power supply for sequin device AC220V
Single-phase
【
2
】
SETTING UP THE MOTOR
2-1 Installing the synchronizer
■
Install the synchronizer A to the machine pulley and
tighten the screws B temporarily. (Fig.1)
■
Set the position bar C to the guide groove of the
synchronizer A and tighten the nut D. (Fig.1)
2-2 Adjusting the needle stop position
■
In order to align a mark “P” of hand pulley with the
setting mark, adjust the synchronizer A after
loosening the screws B. (Fig.1,2)
2-3 Max. machine speed
■
In case of the sequin size at 7mm, reduce the max. machine speed to 500 rpm.
〜
600
ｒ ｐ ｍ
The needle must be at its highest position
(Fig.1)
(Fig.2)
