Kanomax 3900 Operation Manual Download Page 11

Page: 11 / 63

3. Display Description and Operation Procedure

3.2 Initial Screen

3.2.1 Initial Screen

When the instrument is booted up, the initial

screen on the left will be displayed.

All operations can be started from this screen.

(1) Data Display:

Displays numeric value and chart.

(2) Measurement Condition: Displays measurement mode, measurement setting and measurement status.
(3) Environment Data:

Displays the current status when using option sensors.

(4) Status Display:

Displays the status of power source, pump, LD, Over, Alarm and CF card.

(5) MENU:

Configures chart setting, alarm setting and system setting.

FILE:

Loads, prints and deletes stored measurement data.

PRESET:

Loads stored measurement setting file.

CONFIG:

Configures advanced setting in the currently selected mode. Items such as
INTERVAL, SAMPLE T. and CYCLES can be set in each mode.

MODE:

Selects measurement mode setting. Select either SINGLE, SEQUENCE, INTERVAL,
REPEAT, STAT or STANDARD mode.

MONITOR:

Performs a measurement and displays a measurement value. This mode does not save
measurement results. Measurement display value is updated every second.

START:

Starts measuring in the configured mode. This button becomes “STOP” button after
sampling starts. Tap “STOP” button to stop sampling.

(6) PUMP:

Tap “PUMP” button to turn ON/OFF the pump manually.

SAVE:

Tap “SAVE” button to turn ON/OFF the data storage function while sampling.

PRINT:

TAP “PRINT” button to turn ON/OFF the data printing function while sampling.

Alarm Pr:

Tap “Alarm Pr” button to turn ON/OFF the alarm printing function while sampling.

ALARM:

Tap “ALARM” button to turn ON/OFF data alarm function while sampling.

<Icons in the Status Display>

To switch to display chart.

Indicates if the instrument is powered by AC power cable or battery. If battery-powered, the
remaining battery level is also shown.

Indicates the pump status and pump error. When the pump is operating properly, the icon is in
blue. When the pump is off, the icon is in gray.

Indicates the LD status and LD error. When the LD is operating properly, the icon is in blue.
When the LD is off, the icon is in gray.

Indicates if the measurement count per one second exceeds the maximum measurable
concentration or not.

Indicates if an instrument error is occurring or not. Tap this icon to display the error details.

Indicates the CF card status and CF card error.

(3)

(6)

(1)

(2)

(4)

(5)

www.actoolsupply.com

Summary of Contents for 3900
































































Search results

Summary of Contents for 3900

Reviews:

Brands by name

Popular brands

Kanomax 3900, Operation Manual

Search results

Summary of Contents for 3900

Reviews:

Brands by name

Popular brands