background image

INSTALLATION MANUAL OPERATION MANUAL  INSPECTION LOG

KANNAD 406 AF-COMPACT

PAGE: 610

FEB 01/2008

C. Battery replacement requirements

Battery replacement is mandatory:

• after more than 1 hour of real transmission (cumulated duration);
• before or on the battery expiration date;
• after use in an emergency;
• after an inadvertant activation of unknown duration.

Battery available from KANNAD or any KANNAD distributor or dealer.

KANNAD

Z.I. des Cinq Chemins BP23

56520 GUIDEL - FRANCE

Telephone: +33 (0)2 97 02 49 49 Fax: +33 (0)2 97 65 00 20

Web: 

http://www.kannad.com

 - E-mail: 

[email protected]

Support: 

[email protected]

 Tel.: +33 (0)2 97 02 49 00

List of distributor available on our Web site:

http://www.kannad.com/index-en.php

Pages SAFETY > AERONAUTIC ELT.

Only original and approved battery pack included in battery KIT 

BAT200 (P/N S1840501-01) supplied by KANNAD can be installed.

[SAFT-FRIWO , Lithium Manganese Dioxide, 2 x M20 (D-type) cells]

PLEASE CONTACT YOUR LOCAL DISTRIBUTOR

KANNAD refuse all responsibility  and invalidate

all warranty should other packs be installed.

Summary of Contents for 406 AF-COMPACT

























































































Reviews: