Page 10 of 25
8.2.2. Installation of beacon into container
Caution: If a mounting bracket is installed on the beacon, remove it before installing the beacon
into its container.
(1) To remove the cover, lift the locking pin then extract it from the cover.
(2) Put the beacon into the container by sliding the antenna below the HAMMAR release
system.
(3) Fold the cover onto the support making sure the slots (a) of the cover are inserted into the
lugs (b) of the support.
(4) Slide the locking pin into the hole of the cover and the hole of the fastening screw of
HAMMAR release system.
(5) Lock the pin by turning it down making sure it is locked by the lug of cover.
(a)
(a)
(b)
(b)
Summary of Contents for SafeLink EPIRB
