Kanguru KCLONE-1HD-MBC Page 25 User Manual Download

Page: 25 / 34

8. ADVANCED SETUP MENU

The ADVANCED SETUP menu provides you with extra options and operations for the advanced

user. The ADVANCED SETUP menu can be accessed through the SETUP menu. From the SETUP

menu,

tap

the ‘SET’ button to navigate to the ADVANCED SETUP option and then

tap

the ‘RUN’

button to enter the ADVANCED SETUP menu.

Once you have entered the ADVANCED SETUP menu:

•

Tap

the ‘SET’ button to navigate the different menu options.

•

Tap

the ‘RUN’ button to change an option’s setting.

•

Hold

the ‘SET’ button to return to the SETUP MENU

8.1 Device Info

DEVICE INFO allows you to view information about any hard drives currently connected to the

duplicator.

To view device information:

1. From the ADVANCED SETUP menu,

tap

the ‘SET’ button to navigate to the DEVICE INFO

function.

Tap

the ‘RUN’ button to begin viewing the device information. Once the connected hard drives

have been initialized you will see the following:

[ S]1250263728 (6/5)

WDC WD6402AAEX-00Z3A

Source [S] or Target [T] drive

Number of sectors

Hard drive model number

UDMA mode supported /

UDMA mode followed

Tap

the ‘SET’ button to view information about the next device.

4. After you have viewed all devices you will automatically return to the ADVANCED SETUP

menu. You can also

hold

the ‘SET’ button to exit to the ADVANCED SETUP menu at any time.

Advanced Setup Menu / Device Info

Summary of Contents for KCLONE-1HD-MBC


































Search results

Summary of Contents for KCLONE-1HD-MBC

Reviews:

Related manuals for KCLONE-1HD-MBC

Brands by name

Popular brands

Kanguru KCLONE-1HD-MBC, User Manual

Search results

Summary of Contents for KCLONE-1HD-MBC

Reviews:

Related manuals for KCLONE-1HD-MBC

Brands by name

Popular brands