19
4. ThE SETUP MENU
To enter the Setup menu, from the Main menu press the
UP
or
DoWN
button
to navigate to SETUP
and then press the
ENT
button.
Once you have entered the Setup menu:
•
Press the
UP
or
DoWN
button to navigate the Setup menu options.
•
Press the
ENT
button to change an option’s setting.
•
Press the
ESC
button to exit back to the Main menu.
4.1 Set Copy
The SET COPY option allows you to enable or disable the Copy operation. Press the
ENT
button to
change this setting.
•
[
٭
]
– Copy enabled (default). BRIEF, RESIZE and DISK modes will perform a Copy operation.
•
[ ]
– Copy disabled. BRIEF, RESIZE and DISK modes will not perform a Copy operation.
Note:
You cannot disable the SET COPY option if the SET COMPARE option is also disabled.
4.2 Set Compare
The SET COMPARE option allows you to enable or disable the Compare operation. Press the
ENT
button to change this setting.
•
[ ]
– Compare disabled (default). BRIEF, RESIZE and DISK modes will not perform the
Compare operation.
•
[
٭
]
– Compare enabled. BRIEF, RESIZE and DISK modes will perform a Compare operation.
Note:
You cannot disable the SET COMPARE option if the SET COPY option is also disabled.
4.3 brief Immediate
If you are experiencing issues when running Brief Copy, you can disable the Brief Immediate function
which may improve the chance of a successful duplication.
Tap
the ‘RUN’ button to change this
option’s setting.
Tap
the ‘SET’ button to confirm your selection.
•
[
٭
]
– Brief Immediate is enabled (default). When Brief Immediate is enabled, data copying
and analysis are done at the same time during Brief Copy. This is the faster option.
•
[ ]
– Brief Immediate is disabled. When you run a Brief Copy the duplicator will analyze the
Source completely first, and then follow the analysis result to copy the data from the Source
to the Target drives. Duplication through Brief Copy will take longer when Brief Immediate is
disabled.
The Setup Menu / Set Copy / Set Compare
