4.) A Found New Hardware wizard will appear. Click
Next
to install the drivers.
5.) Select “
Search for the best driver for your device
” and click
Next
6.) Select “
Specify a Location
” and click
Browse
.
7.) You want to select the
Windows (98 only)
folder
from
the
Duplicators without
LCD screen
folder located in the drivers CD and click
OK
.
3.) Click
Next
to install these drivers, then
Finish
to complete the installation.
4.) You may have to restart your computer to complete the installation.
5.) After the installation has finished you will find an additional CD in My
Computer. Use the provided burning software to burn CDs with the drive.
For Mac users:
1. Double click the
Kanguru Duplicator.sit
file found in the appropriate Mac OS
folder.
OS 9:
Kanguru CD & DVD Duplicators\Duplicators without LCD
screen\Drivers\MacOS9
OSX:
Kanguru CD & DVD Duplicators\Duplicators without LCD
screen\Drivers\MacOSX
Helpful Hints
1.) Check to make sure that your media supports 16x burn rates. If you are getting
“bad burns” check to make sure that the media supports the desired speed of
duplication. If not, you have two choices, run a Speed Test to find an appropriate
speed setting, or buy 16x media.
2.) If you experience an error in duplication, (after checking the media type), it is
advisable to run the Speed Test. If this does not help, there is a good chance that
the error is either in the media type or the information being copied.
3.) Not all types of CD formats are supported by this CD-Duplicator due to a variety
of factors. If you experience problems with a specific disc or CD format, try
duplicating a simple audio CD or data CD. If this works, there is a good chance
that there is an incompatibility issue between the duplicator and media you are
attempting to copy.
