KANGURU CD DUPLICATOR FUNCTIONS
Control Panel of Hi-Copy (located on the front)
FUNCTION OF LEDs
A. During stand-alone copying mode:
READY
LED will turn on while the CD is being ready
COPY
LED will turn on while the CD is being copied.
ERROR
LED will turn on when there is an error in copying.
B. During USB mode:
READY
+
COPY
+
ERROR
Note :
All LEDs will turn on while in EXTERNAL writer mode
FUNCTION OF BUTTONS
MODE:
Pressing
MODE + SPEED
together will erase a CD-RW.
*
•
Note:
For both these functions you must hold the
MODE
button down and then press
the second button (
RUN
or
SPEED
). Release the second button (
RUN
or
SPEED
)
and then release the
MODE
button.
SPEED:
Pressing the SPEED button will change the burn speed
16x
. This may be helpful if
your media can’t handle the higher writing speeds.
RUN:
Pressing the RUN button will start normal CD to CD copy. The default speed is the
MAXIMUM writing speed
of the CDRW.
