background image

Kanguru Autoloader 

100 

 

7.2 Specifications 

• 

CDRW: 

52x 24x 52x CD Burner 

• 

CD-ROM: 

52x CD-Rom 

• 

Support Formats:

 Audio CD, CD-ROM (Mode1/Mode2), CD-ROM/XA 

(Mode2, Form1/Form2), VCD, CD-I, Photo CD, CD Extra, CD-R, CD-RW 

• 

Write Speed:

 CD-R 700MB data ~ 3 minutes (20 CDs per hour) 

• 

Hopper Capacity:

 100 discs 

• 

Dimensions:

 12.2” x 9.4” x 11.4” (HxWxD) 

• 

Weight: 

20 lbs 

• 

Safety Regulations:

 CE/FCC 

• 

Operating Temp: 

42

°

F ~ 86

°

F (6

°

C ~ 30

°

C) 

• 

Power:

 100-240VAC, 50/60Hz 

 
 

8. Warranty and Tech Support 
 

8.1 Warranty  

This product carries a *1 year limited warranty on the case, controller and all internal 
components based on normal usage. Kanguru Solutions is not responsible for any 
damages incurred in the shipping process. Any claims for loss or damage must be made 
to carrier directly. Claims for shipping errors should be reported to Kanguru Solutions 
within three (3) working days of receipt of merchandise. 
 
All repairs will be made by technicians at Kanguru Solutions. The unit must be shipped 
back in its original shipping carton to ensure warranty coverage. An RMA# must be 
assigned to your unit before it is shipped to us. Any units that are sent in without an 
RMA# will be rejected and sent back to the sender.  
 
*90 day warranty on labor.

 

 

8.2 Tech Support 
 

If you experience any problems using your Kanguru CD or DVD Autoloader or have any 
technical questions regarding any of our products, please call our tech support department. 
Our tech support is free and available Monday through Friday, 9am to 5pm EST.  
 

Call 1-508-376-4245 or 

Visit our website at www.KanguruSolutions.com

 

 
 

 

                  

                 

 

11

Summary of Contents for Autoloader 100












Reviews: