6/11
timing as system regeneration mode, moving cursor on Week timing and press ENTER
to access, display as below
Pushing
and
keys sets date and time requested to regenerate, then press
ENTER to get into, display as below
Note: Interval mode setting. Move cursor on Interval and press ENTER to get into,
display as below
Set interval time from 1 to 9999 seconds, and then press ENTER .
Note: among four regeneration modes, remote mode is highest priority, namely no matter Week
timing or Interval mode, as long as Stager controller receives remote signal, it will initiate
regeneration program.;
Business Lock: if its function is needed please contact to us.
2.4. M program: Move cursor on M Prog and press ENTER to get into M program
setting, display as below
Change number of push
key to change number of stages (1-16 total) and press
Week Plan
SU MO TU WE TH FR SA
Week Timing SU
01: 00: 00
Interval time
0000 min
Program
Stages: 3
