Kanga PW628, Operator'S Manual

Page: 63 / 69

63
PERFORMANCE PW628 DW625
Max. Lift Capacity 250 kg 551 lbs 250 kg 551 lbs
Travel Speed 7 km/h 4.3 mph 7.5 km/h 4.7
Operating Weight (Machine Only with water fi lled tyres) 875 kg 1929 lbs 972 kg 2138 lbs
Fuel Capacity 45 L 11.8 gal 45 L 11.8 gal
ENGINE
Manufacturer Honda GX690 Kubota D902
Power 16.5 KW
22.1 hp
*
17.5 KW 23.5 hp
DRIVE SYSTEM
Drive Control Soft Touch Hand Levers Soft Touch Hand Levers
Throttle Control Hand Levers Hand Lever
Wheels Direct Drive
Hydrualics Motors
Direct Drive
Hydraulic Motors
HYDRAULICS
Gear Pump Displacement 11.3 cc/rev 0.69 cu.in/rev 12.5 cc/rev 0.76
cu.in/rev
Pump Output 41 L/min 10.75 US gal/
min
45 L/min 11.9 US
gal/min
System Pressure 207 bar 3000psi 220 bar 3200 psi
Hyd. Reservoir Capacity 70 L 17.4 US gal 70 L 17.4 US gal
BUCKETS
Standard Bucket Capacity 0.1 m ³ 3.5 cu.ft 0.1m ³ 3.5 cu.ft
4 in 1 Bucket Capacity 0.1 m ³ 3.5 cu.ft 0.1m ³ 3.5 cu.ft
DIMENSIONS
A Max Operating Height 2500mm 98.4” 2500mm 98.4”
B Height to Hinge Pin 1855mm 73” 1855mm 73”
C Overall Height 1340mm 52.8” 1340mm 52.8”
D Overall Length With Bucket 2200mm 86.6” 2200mm 86.6”
E Overall Wheel Width 1030mm 40.6” 1030mm 40.6”
F Bucket Reach at 40º 410mm 16.1” 410mm 16.1”
Bucket Max Reach (Level) 1020mm 40.1” 1020mm 40.1”
G Dump Height Std. Bucket 1130mm 44.5” 1130mm 44.5”
Dump Height 4 in 1 Bucket 1855mm 73.0” 1855mm 73.0”
H Bucket Width 1050mm 41.3” 1050mm 41.3”
I Bucket Max Roll Back 40° 40°
J Bucket Max Dump Angle 60° 60°
K Ground Penetration 430mm 16.9” 430mm 16.9”
L Overall Length Less Bucket 1660mm 65.4” 1660mm 65.4”
M Ground Clearance 185mm 7.3” 185mm 7.3”
N Angle of Departure 40° 40°
Approach Angle 90° 90°
SPECIFICATIONS - MID RANGE LOADER
*
Net power the Power rating of the engine indicated in this document is the net power of the production engine only and is
measured in accordance with SAE J 1349 at 3600 Rpm, Mass production engines may vary from this value, Actual power output
for the engine installed in the
fi nal machine May vary depending on numerous factors,including operation speed of the engine in
application, environmental conditions and other variables.