Kanga DW625 Operator'S Manual Download | Manualshive

Page: 4 / 69

background image

4

Proprietary Statement

© Copyright 2009 Digga Loaders Pty Ltd. All rights reserved. No part of this publication may be
reproduced, photocopied, stored on a retrieval system, or transmitted without the express prior
written consent of the publisher.

Disclaimer

While all care has been taken in the development of this product, no loss of any kind is accepted by
Digga Loaders Pty Ltd or its agents arising from the use of this document.
Digga Loaders Pty Ltd makes no representations or warranties with respect to the contents of this
document, and speci

fi

cally disclaims any express or implied warranties or

fi

tness for any particular

purpose. Further, Digga Loaders Pty Ltd reserves the right to revise this publication and to make
changes to its contents, at any time, without obligation to notify any person or entity of such
revisions or changes.

Trademarks

Digga Loaders PTY LTD (ACN 087 977 660, ABN 14 087 977 660) 2009 (“we”, “us”)
™ Trade mark of Digga Loaders Proprietary Limited.
® Australia Registered trade mark of Digga Loaders, The Kangaroo Device, Platypus, Kanga
Loaders, Kanga Kid, Earth Power.
™Business on a Trailer, Kanga.
© Digga Loaders Group

1 Copyright

1.1 kanga-loader.com, the material on kanga-loader.com, the software, design, text and graphics
comprised in kanga-loader.com and the selection and layout of kanga-loader.com are owned or
licensed by us and protected by copyright under the laws of Australia and other countries.
1.2 You may view this website and its contents using your web browser and save an electronic copy
of the website solely in the usual operation of your web browser in visiting the site.
1.3 You must not otherwise reproduce, transmit (including broadcast), adapt, distribute, sell, modify
or publish or otherwise use any of the material on the site, including audio and video excerpts,
except as permitted by statute or with Digga Loaders prior written consent.

2 Trade Mark Notice

This site includes registered trade marks and trade marks which are the subject of pending
applications or which are otherwise protected by law including, but not limited to the word KANGA
LOADERS, the Kanga Loaders logo, the Digga Logo. You may not use these trade marks or the
names “Digga Loaders Proprietary Limited”, “Kanga Loaders Australia Proprietary Ltd” or “Kanga
Loaders” or the name of any of our related companies.

3 Framing

You must not frame any of the material appearing on kanga-loader.com except in accordance with
Digga Loaders Group’s Linking and Framing Policy or otherwise in accordance with Digga Loaders
group’s prior written consent.
©Digga Loaders Proprietary. All rights reserved.

Patents

Patents Pending US 6397967, 438218 & 10/096997 AU 65424/99, 2006101054
UK 2345046. AU Registered Design 138603

«
...
2
3
4
5
6
...
»

Summary of Contents for DW625






































































Reviews:

No comments

Related manuals for DW625

Brand: RAMROD Pages: 36

Brand: jcb Pages: 15

Brand: Takeuchi Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands