Kanga 216 Series, Operator'S Manual

Page: 82 / 100

78
Series 216 Loader
© 2022 Kanga Loaders.
Operator’s Manual · Loader Specifications and Decals
Specifications: Series 2 Loader With Wheels
PERFORMANCE DW825
Tipping Load
1
(No Bucket) 539 kg 1186 lb
Tipping Load
1
(62kg Kanga GP bucket) 477 kg 1050 lb
Tipping Load
1
(84kg Kanga HD GP bucket) 455 kg 1001 lb
Tipping Load
1
(157kg Kanga 4in 1 GP bucket) 382 kg 841 lb
Rated Operating Capacity (ROC)
1
(No bucket) 270 kg 593 lb
Maximum Travel Speed (Default Mode) 7 km/hr 4.35 m/h
Maximum Travel Speed (Fast Mode) N/A N/A
Fuel Capacity (Diesel) 43 L 11.4 US gal
Loader Mass
2
1095 kg 2414 lb
ENGINE
Manufacturer Kubota D902
Rated Power
3
17.5 KW 23.5 hp
DRIVE SYSTEM
Drive Control Soft Touch Hand Levers
Throttle Control Hand Levers
Tracks/Wheels with Direct Drive Hydraulic
Motor
Wheels
HYDRAULICS
Gear Pump Displacement 11.3 cc/rev 0.69 cu in/rev
Pump Output 40.6 L/min 10.73 US gal/min
System Pressure 220 bar 3200 PSI
Hydraulic Reservoir Capacity 92 L 24.3 US gal
BUCKETS
GP Bucket Capacity (heaped / struck) 4 0.12 m 3 / 0.09 m 3 4.24 cu ft / 3.21 cu ft
HD 4-in-1 Bucket Capacity (heaped / struck)
4
0.13 m 3 / 0.095 m 3 4.59 cu ft / 3.36 cu ft
DIMENSIONS
A Max Operating Height with 4in1 1100 HD
Bucket
2634 mm 103.70"
B Height to Hinge Pin 2093 mm 82.40"
C Overall Height (No Warning Lights) 1389 mm 54.69"
D Overall Length With 4in1 1100 HD Bucket 2352 mm 92.60"
E Overall Track or Wheel Width 1018 mm 40.08"
F Bucket Reach at 40º (4in1 1100 HD Bucket) 158 mm 6.22"
G Dump Height (4in1 1100 HD Bucket) 1376 mm 54.17"
H Bucket Width (4in1 1100 HD Bucket) 1090 mm 42.91"
I Bucket Max Roll Back 40°
J Bucket Max Dump Angle 59°
K Ground Penetration (4in1 1100 HD Bucket) 507 mm 19.96"
L Overall Length Less Bucket 1866 mm 73.46
M Ground Clearance 191 mm 7.52"
N Angle of Departure 29°
Approach Angle With No Bucket 90°
Approach Angle With Bucket Rolled back 28.39°
1.
Tipping load and Rated Operating Capacity (ROC) have been determined to ISO 14397-1, though the values shown here are for the material load and bucket mass combined. This is to
represent the general loader capabilities and cannot be used for material load without adjusting for the specific attachment. Referring to the section of this manual “Practice Safety at All Times”,
these adjustments have been made for a range of Kanga buckets and fork tynes. Note that ROC is 50% of the Tipping Load for wheel loaders and 45% for Kanga “over tire track” loaders.
2. Loader mass is the mass of the loader and fluids only. Specifically, this is the operating mass without the operator or bucket mass.
3. Power Rating is the net power of the production engine only as measured in accordance with SAE J 1349 at 3600 RPM. Mass production engines vary from this value. Actual power output for
the engine installed in the delivered machine may vary depending on numerous factors. These factors can include operation speed of the engine in the application, environmental conditions, and
other variables.
4.
Volumes based on ISO 7546:1983.