WP-IPKEYPAD8D
13 |
P a g e
After selecting a command, you will need to choose the delay and
interface for the command.
The “Delay(ms)” setting is the length of time to wait before
sending
the next command and is set in milliseconds. The interface for sending
commands can be set to the keypad itself (SysCMD), to pre-defined
Ethernet devices (Device), to a specified IP address (TELNET) or to
trigger the relay port (Relay). Click on “Save Change” to co
nfirm the
settings.
Sending commands to devices on the local network, or across the
Internet requires the IP address and network port number of the
destination device. Once the destination information is complete
please click on “Save
Changes”.
Note: It is strongly suggested to not set a delay time less than 100ms for
system commands or less than 500ms for Telnet commands to ensure
that the command is properly received and executed before the next
command is sent.
When you have finished editing the macro
click on “Save
Change”.
