WP-IPKEYPAD8D
12 |
P a g e
(1)
Macro 1:
Sequentially light all red LEDs on the keypad with
100%
brightness and a delay of 500ms between commands
(2)
Macro 2:
Sequentially light all blue LEDs on the keypad with 100%
brightness and a delay of 500ms between commands
(3)
Macro 3:
Switch off all red LEDs (set brightness to 0%)
(4)
Macro 4:
Switch off all blue LEDs (set brightness to 0%)
(5)
Macro 5:
LED demo mode toggle (switch on/off Demo Mode)
(6)
Macro 6:
Light the blue LEDs with 10% brightness → set all blue
LEDs
to 0% brightness → close then open Relay 1 with a delay of
1000ms
between commands
Note: LED Demo Mode is on by default. To disable Demo Mode please
click the switch at the bottom of this WebGUI tab.
The “Background Light” slider allows the user to adjust the
overall
brightness of the keypad’s
LEDs.
Click on the
icon to edit each button’s
macro.
At the top of the Macro edit window is a text field where you can edit
the name of the macro. Type your new macro name into the box and
then click the icon to save it.
Within the edit window the up/down arrows will change the
command’s execution order. Th
e
icon allows you to edit the
delay and interface for the command. The
icon will delete the
command.
Click on the
icon to insert a new command before the current one.
Select one of the pre-defined commands from the list. (Details on how
to create these pre-defined commands are listed later in this section.