KanexPro SW-VDYWALL, User Manual

Page: 12 / 31

SW-VDYWA LL
l RS232
If connected successfully, the message window on the right corner of the main interface will show the message Connection Success.
If not, a popup window will appear with the message
can’t open com .
l USB
If not well connected, a popup window will appear with the message can’t Find USB. If connected, the message window will show
the message
Connection Success .
l TCP/IP
Use the network port and enter its IP address. The default IP address is 192.168.0.178, and the port number is 4001. The message
window will show the message
Connect NET Success .
l Disconnect
To disconnect the current connection and if user wants to change another control way, please also disconnect the current
connection first.
5.2 Main Interface
Figure 5-3
shows the main interface and the various setting areas on it. The settings mentioned below (Section 5.3 to Section 5.6)
are referred to it.
Figure 5-3 Main Interface
5.3 Menu Bar Function Settings
5.3.1 File Button
Function: To open the saved image display mode file, or to save a new one, or to save the current display mode file to another path.
Detailed operations: Run the control software and click on the menu button
File . The sub menu item Open is to open a saved image
display mode file, and Save is to save the current image display mode file, and Save as is to save the current image display mode
file to another path. As shown in Figure 5-4 .
Figure 5-4 File Menu