KANEXPRO
SW-4X1SL18G
9 |
P a g e
4. Panel Control
4.1
Input source switching
The “
Auto Source
” button on the front panel can be used to select input source and
switch mode.
4.1.1
Manual switching mode
Press the “
Auto Source
” button to switch among inputs 1~4, the corresponding
indicator will illuminate green for easy recognition.
4.1.2
Auto-switching mode
Press and hold the button “
Auto Source
” for
3 seconds or more
to switch between
manual mode and auto mode. (Default: Manual switch.). Once enter auto-switching
mode, the “
MODE
” LED will light up.
The auto-switching mode abides by the following principles:
New input
Once a new input signal is connected, the SW-4X1SL18G will switch to the
new signal automatically.
Power Rebooting
The SW-4X1SL18G supports “power off” memory function. If the last
selected signal is still available, the switcher will output said signal. If not, the
switcher will detect all the input signals with priority from “
IN 1
” to “
IN 4
”
ports. When the first signal is detected, it will transfer to the output.
Signal removing
Once the current input signal is removed, the SW-4X1SL18G will detect all
input signals with priority directed towards the succeeding input port. It will
transfer the first available input source to the output device.
For example, the selected input signal is “
IN 2
”. If you disconnect the current
input source, SW-4X1SL18G will detect all input signals per the following
order: “
IN 3
”, “
IN 4
”, “
IN 1
”. Then the first available source will be switched as
the input.
