SW-2X14KUSBC – 2x1 USB-C & HDMI Auto switcher
17
⚫
The “XXXX” represents the
specific command (ASCII, up to
48 byte).
#SET_AM_[B]_
[T]:XXXX
Send the command "XXXX" to the
third-party device while the
VOLUME MUTE
key is pressed.
⚫
The “[B]” represents the baud
rate of third-party device, and its
value is “00~06”, the
corresponding baud rate shows
at above list.
⚫
The “
[T]
” represents the delay
time of sending command, and
its value is “00~99”.
⚫
The “XXXX” represents the
specific command (ASCII, up to
48 byte).
Command:
#SET_AM_05_30:ABCDEFG
Feedback:
@BAUDRATE: 4800
@DELAY TIME: 30 s
@DISPLAY ON TO
SEND:1234567
#SET_AU_[B]_
[T]:XXXX
Send the command "XXXX" to the
third-party device while the
key is pressed.
⚫
The “[B]” represents the baud
rate of third-party device, and its
value is “00~06”, the
corresponding baud rate shows
at above list.
⚫
The “
[T]
” represents the delay
time of sending command, and
its value is “00~99”.
Command:
#SET_AU_05_30:ABCDEFG
Feedback:
@BAUDRATE: 4800
@DELAY TIME: 30 s
@ TO
SEND:ABCDEFG
