8
9
6. EDID Mode:
The defined EDID setting list of the product is shown as below:
Technical
11111
1080P, Stereo Audio 2.0
11110
1080P, Dolby/DTS 5.1
11101
1080P, HD Audio 7.1
11100
1080I, Stereo Audio 2.0
11011
1080I, Dolby/DTS 5.1
11010
1080I, HD Audio 7.1
11001
1080P 3D, Stereo Audio 2.0
11000
1080P 3D, Dolby/DTS 5.1
10111
1080P 3D, HD Audio 7.1
10110
4K2K30Hz_444, Stereo Audio 2.0
10101
4K2K30Hz_444, Dolby/DTS 5.1
10100
4K2K30Hz_444, HD Audio 7.1
10011
4K2K60Hz_420, Stereo Audio 2.0
10010
4K2K60Hz_420, Dolby/DTS 5.1
10001
4K2K60Hz_420, HD Audio 7.1
10000
4K2K60Hz_444, Stereo Audio 2.0
01111
4K2K60Hz_444, Dolby/DTS 5.1
01110
4K2K60Hz_444, HD Audio 7.1
01101
4K2K60Hz_444, Stereo Audio 2.0 HDR
01100
4K2K60Hz_444, Dolby/DTS 5.1 HDR
01011
4K2K60Hz_444, HD Audio 7.1HDR
01010
COPY_FROM_LOOP OUT
01001
COPY_FROM_CAT OUT1
01000
COPY_FROM_CAT OUT2
00111
COPY_FROM_CAT OUT3
00110
COPY_FROM_CAT OUT4
00101
COPY_FROM_CAT OUT5
00100
COPY_FROM_CAT OUT6
00011
COPY_FROM_CAT OUT7
00010
COPY_FROM_CAT OUT8
00001
1080P, Stereo Audio 2.0
00000
PC control mode
7. ASCII Commands:
The product also supports ASCII command control. Connect the
SERVICE port of the product to a PC with an USB cable. Then, open
a Serial Command tool on PC to send ASCII commands to control the
product. The ASCII command list about the product is shown as below.
ASCII Commands
Serial port protocol. Baud rate: 115200, Data bits: 8bit, Stop bits:1, Check bit: 0
x - Parameter 1
y - Parameter 2
! - Delimiter
Command
Function Description
Example
Feedback
Default Setting
Power
s power z!
Power on/off the device,
z=0~1 (z=0 power off, z=1
power on)
s power 1!
Power on
System Initializing...
Initialization Finished!
FW version x.xx.xx
power on
r power!
Get current power state
r power!
power on/power off
s reboot!
Reboot the device
s reboot!
reboot
System Setup
help!
List all commands
help!
r type!
Get device model
r type!
HDC-SPB18D60
r status!
Get device current status
r status!
Get the unit all
status: power, in/out
connection, edid mode
r fw version!
Get Firmware version
r fw version!
MCU BOOT: Vx.xx.xx
MCU APP: Vx.xx.xx
r link in!
Get the connection status
of the input port
r link in!
HDMI IN: connect
r link out y!
Get the connection status
of the y output port,
y=0~8(0=all, 1~8=CAT 1~8)
r link out 1!
CAT OUT1: connect
r link loop out y!
Get the connection status
of the y loop output
port, y=1
r link loop out 1!
HDMI LOOP OUT:
connect
s reset!
Reset to factory defaults
s reset!
Reset to factory defaults
System Initializing...
Initialization Finished!
FW version x.xx.xx
