6
7
Rear Panel
Side Panel
No.
Name
Function Description
1
EDID DIAL
switch
Used to set EDID mode. Please refer to Section “6. EDID
Mode” for details.
2
SERVICE port
Used f
or fir
mware update or serial port command
control.
5.2 CAT Receiver
No.
Name
Function Description
1
HDMI OUT
HDMI output port, connect to HDMI display device such as TV
or Projector with an HDMI cable.
2
CAT IN
Connect to the CAT OUTPUT port on the transmitter with a
CAT cable.
3
Power Indicator
Lamp
(G
r
een)
When the receiver is powered on, the power indicator lamp
will be on.
4
Data signal
Indicator Lamp
(
Orange
)
•
Illuminating: HDMI signal with HDCP.
•
Flashing: HDMI signal without HDCP.
•
Dark: No HDMI signal.
5
SERVICE port
•
Used f
or fir
mware update.
6
IR IN
Connect the IR Blaster cable to transmit IR signal
from the CAT receiver.
7
DC 12V
Plug the DC 12V power supply into the unit and connect the
adaptor to an AC outlet.
(Note: The transmitter can power the receiver via a CAT cable.)
5.3 IR Pin Definition
Note:
When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is
0-5 meters; when the angle between the IR receiver and the remote control is ± 90 °, the transmission distance
is 0-8 meters.
No.
Name
Function Description
1
AUDIO OUT
(
COA
X, L/R)
Coaxial/analog audio output port, connect t
o amplifier or
speaker.
2
HDMI port
IN: HDMI input port, connect to HDMI source device such as
DVD or set-top box with an HDMI cable.
3
CAT OUTPUT
port (1~8)
Connect to the CAT IN port of the CAT receiver with a CAT
cable.
4
Link Signal
Indicator lamp
(G
r
een)
•
Illuminate: Transmitter and receiver are connected.
•
Dark: Transmitter and receiver are not connected.
5
Data Signal
Indicator lamp
(
Orange
)
•
Illuminating: HDMI signal with HDCP.
•
Flashing: HDMI signal without HDCP.
•
Dark: No HDMI signal.
6
IR OUT
Connect the IR Blaster cable to transmit IR signal
from the CAT receiver.
7
DC 12V
Plug the DC 12V power supply into the unit and connect the
adaptor to an AC outlet.
(Note: The transmitter can power the receiver via a CAT cable.)
LOOP OUT: HDMI loop output port, connect to the HDMI
display device such as TV or Monitor with an HDMI cable.
