HDSC12
18
9.2.2. Connection Introduction
1)
Connect a computer and Scaler Switcher with Digital Amplifier-TN to the same
network. Open the PTNET software (or any other TCP/IP communication software)
and create a connection, enter the IP address and port of Scaler Switcher with
Digital Amplifier-TN (default IP: 192.168.0.178, port:4001):
2)
After connecting successfully, we can enter commands to control the Scaler
Switcher with Digital Amplifier-TN, as below:
Here you will receive the
feedback when a command
is sent.
Here for command entering.
All the control commands are
the same as the RS232 list.
