KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
20
to 9.
Recall[Y].
Recall the preset command [Y].
Recall From F8
V: 01->001
A: 01->001
…
…
Clear[Y].
Clear the preset command [Y].
Clear F8
PWON.
Work normally.
PWON
PWOFF.
Enter in standby mode.
PWOFF
HDCPON.
Turn on the HDCP output.
HDCPON
HDCPOFF.
Turn off the HDCP output.
HDCPOFF
/V00.
Inquire the version of backboard
software.
Vx.x.x
UpgradeIntEDID[x].
Upgrade built-in EDID data. Supports 6
types of EDID data (see
Note 6
). When
the switcher gets the command, it will
show a message to send EDID file (.bin
file).
EDIDUpgrade[x].
Upgrade EDID data of input ports
When the switcher gets the command,
it will show a message to send EDID
file (.bin file). Operations will be
canceled after 10 seconds.
EDID/[x]/[y].
Set the EDID data of input port [x] to
built-in EDID data of type [y].
[y]= 1~6.
EDIDG[x].
Get EDID data from output [x] and
display the data on serial port control
software.
EDIDMInit.
Reset factory default EDID for every
input channel.
EDIDMInit
EDIDM[X]B[Y].
Manually EDID switching. Enable input
[Y] to learn the EDID data of output[X].
If there is problem learning the EDID
data, it will automatically set the default
EDID data for input [Y].
EDIDM2B1
USER/[Y]/[X]:*****;
Custom command for signal cards,
[Y]=I/O; [X]= port number; *****: User-
definable command, e.g. 0623%
0911%.
Restore factory default.
All I/O connection will be restored to
straight through: 1->1, 2->2,
…; saved