KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
16
4. Control Operations
4.1. Front Panel Button control
Users can control Modular Matrix Switcher 16x16 (with Audio) rapidly and directly with
its front panel buttons. Here is a brief operation guide to front panel buttons.
Format:
“
Input Channel
” + “
Switch Mode
” +“
Output Channel
”
Note:
1)
“Switch Mode”:
AV: Transfer AV signal from AV signal card& audio signal from audio card
synchronously
Video: Transfer AV signal from AV signal card
Audio: Transfer audio signal from audio card
2)
“Input Channel”: Fill with the number of input channel to be controlled,
3)
“Output Channel”: Fill with the number of output channels to be controlled. Press
“All” to select all the outputs.
4)
The input/output channels on the rear panel are counting from left to right, top to
bottom.
5)
The input delay time between two numbers of every input& output channel must be
less than 5 seconds; otherwise the operation will be cancelled.
Example:
1. To transfer input 1 to output 1, press input
“
1
”, output “
1
”.
2. To transfer signals from input 1 to all output channels, press buttons in this order:
“
1
”, “
All
”.
Functional Buttons:
UNDO
button: return to the previous status
Example: Input 6
is connecting with output 6, press input “6” + “AV”+ output 4 to change
the connection. Press
“Undo” to enable input 6 to reconnect with output 6.
Button: If you press buttons
“1”, “AV”, “2”, “
” in order, then “2” will be canceled.
THROUGH
button: get straight I/O connection, e.g. input 1-> output 1, input 2-> output
2.
Press
“Input Channel “+”Through”
Example: If you press buttons
“ALL”, “THROUGH” in order, then the result will be like
input 1
output 1, input 2
output 2, input 3
output 3
… input 8
output 8.
