KanexPro HDBT-VTSC72-4K, User Manual

Page: 15 / 67

15 / 67
button on the front panel or in the remote to select Window 1.
Method 2: first press the Video 1 button on the front panel or in the remote, the 1 button
indicator on the panel turns solid on, 2~7 button indicators are blinking (If an indicator is solid on,
it means the source currently selected; If an indicator is blinking, it means this source can be
selected), press the INPUTS 1 button on the front panel or in the remote.
4) Windows 2 can select DisplayPort6 using the same method.
5) When the INPUTS indicators are off, the panel status is shown as follows.
6) HDMI output picture is changed to the status below.
Triple Windows
1) Use button on the front panel or in the remote to set to the mode of triple windows, Video 1,
2 and 3 button indicators on the front panel light up.
2) HDMI output port outputs the mode of triple windows. Window 1 is configured to HDMI1 input
(HDMI1 is the factory default. If any changes are made, use the last configuration); Window 2 is
configured to HDMI2 input (HDMI2 is the factory default. If any changes are made, use the last
configuration); Window 3 is configured to HDMI3 input (HDMI3 is the factory default. If any
changes are made, use the last configuration). The windows are shown as follows.