4K HDBaseT™ 4x4 Matrix Switcher
MX-HDBASE4X4-4K 15
www.kanexpro.com
4.3 RS232 Control
4.3.1 Connection with RS232 Communication Port
Except the front control panel, the Switcher can be controlled by far-end control
system through the RS232 communication port. This RS232 communication port is a
female 9-pin D connector. The definition of its pins is listed in the table below.
No.
Pin
Function
1
N/u Unused
2
Tx Transmit
3
Rx Receive
4
N/u Unused
5
Gnd Ground
6
N/u Unused
7
N/u Unused
8
N/u Unused
9
N/u Unused
4.3.2 Installation/uninstallation of RS232 Control Software
l
Installation
Copy the control software file to the computer connected with the
switcher.
l
Uninstallation
Delete all the control software files in corresponding file path.
4.3.3 Basic Settings
Firstly, connect the switcher with an input device and an output device. Then, connect it
with a computer that is installed with RS232 control software. Double-click the software
icon to run this software.
Here we take the software
CommWatch.exe
as example. The icon is showed as below:
The interface of the control software is showed as below:
