background image

 

   

 

 

READ THIS IMPORTANT INFORMATION ON SAFE AND 

EFFICIENT OPERATION BEFORE USING 

 

YOUR

 

LAND

 

MOBILE

 

RADIO. 
A List of several possible hazard is given.

 

WARNING 

 

 

Only qualified technicians are allowed to repair this product. 

 

Typical electronic systems that may malfunction due to the lack of protection from radio 

frequency energy present when transmitting. If the vehicle contains such equipment, 

consult the dealer. 

 

Just as it is dangerous to fuel a vehicle with motor running, similar hazard exist when 

operation a mobile radio. Be sure to turn the radio off while fueling a vehicle. 

 

Dynamite blasting caps may be caused to explode by operating a radio within 500 feet 

of the blasting caps. Always obey the “Turn Off Two –Way radios” signs posted where 

dynamite is being used. 

 

Do not install the radio in the closed compartment that contains an LP gas container or 

its fitting. 

 

No changes or adjustments shall be made to the equipment except by an authorized or 

certified electronic technician. 

 

 Using your radio to send personal messages is a violation of FCC rules. 

 

 

Summary of Contents for F-25V












Reviews: