Kane LS1, Operator'S Manual

Page: 9 / 16

LS1 Page 9
SPECIFICATIONS
(NOTE: MAY BE SUBJECT TO CHANGE)
Power Supply Four AA-sized Alkaline Batteries
Sensitivity <50 ppm methane
Sensor Solid-State
Level Indicator Six LEDs moving from green at low concentration
through yellow to red. Level is adjustable and hence
does not give concentration reading.
Alarm Visual and audio at approximately 10% of L.E.L. with
an absolute maximum of 40% L.E.L. for methane. Can
be calibrated for other concentrations or gases.
Warm-up Approximately 1 min.
Response Time Less than 2 seconds (to 40% L.E.L.)
Recovery Time Less than 4 seconds (from 40% L.E.L.)
Duty Cycle Continuous
Battery Life Approximately 12 hours
Dimensions 80 x 220 x 60 mm
Weight 450g
Probe Length 400mm
Accessories Carry Case
Alkaline Batteries
Instruction Manual
Operation Environment
Temperature 0-50°C
Humidity 10% - 90% RH non-condensing